8 years. 60+ completed Revit projects. We are the BIM coordination partner architecture firms and contractors call when they cannot afford errors in the field.
Every undetected clash, every uncoordinated MEP system, every shop drawing error — they don't disappear. They compound. They become RFIs, change orders, delays, and lawsuits.
Your ductwork runs through your structural beam. Your GC finds it on Day 1 of MEP rough-in. The clock stops. The budget bleeds. This is 100% preventable with proper BIM coordination.
When consultants are working in silos with uncoordinated models, RFIs pile up during construction. Each one costs time, money, and trust with your contractor and client.
The average coordination failure in commercial construction generates $28,000–$80,000 in change orders. On a multifamily project, that number multiplies with every floor.
Every unresolved clash discovered in the field stops work while consultants confer. In construction where labor costs run $150–$300/hour per trade, delays are catastrophic.
The majority is directly traceable to poor BIM coordination and clash detection failures. SynchroEdge exists to make sure none of that cost comes from your project.
Every service we offer is built around one outcome: your project reaches the field coordinated, clash-free, and construction-ready. We do not offer generic BIM — we deliver precision coordination.
Full MEP coordination in Revit, federated model build, Navisworks clash detection with prioritized resolution reports. We catch every conflict before your GC does.
Revit · NavisworksLOD 100–500 architectural Revit models built to your firm's standards and design intent. From schematic through construction documentation.
LOD 100–500Cold-formed steel and structural BIM modeling for mid-rise residential and commercial. Coordinated with architectural and MEP for zero structural conflicts.
CFS · StructuralPermit-ready, contractor-ready documentation sets extracted from coordinated Revit models. Global DOB filing standards. Buildable from day one.
DOB ReadyFabrication-level MEP and structural shop drawings produced from coordinated BIM models — not redrawn from 2D. Accuracy guaranteed at LOD 400.
LOD 400Site coordination, grading, utilities, and civil infrastructure modeling. Full coordination with building systems for zero conflicts at the site boundary.
Civil · SiteA proven 5-phase process developed across 60+ projects. No surprises. No scope creep. No deliverable that isn't construction-ready.
We review drawings, define LOD targets, align on software standards and deliverable formats before a single element is modeled.
Architecture, MEP, and structural models built or integrated in Revit. All consultants working from one source of truth.
Full clash matrix delivered with severity-ranked resolution recommendations. Not just a number — an actionable coordination report.
We run coordination until the model is clean. Every clash resolved, every consultant aligned, every system coordinated.
Permitted documentation sets, shop drawings, and as-built-ready models. Handed off to your team ready for the field.
LOD 350 · MEP + Structural Coordinated
Zero Field RFIs Reported
We are not an outsourcing shop offering "IT, admin, and BIM." We do one thing — BIM coordination — and we do it at a level that protects your project, your reputation, and your budget.
DOB filing requirements. Building Code constraints. The pace of a renovation in big cities. Multifamily permitting. We are not a generic offshore vendor — we understand your construction environment.
8 years of hands-on Revit across 60+ real projects. Our work is reviewed by a senior BIM specialist, not delegated to junior staff. You get expert-level output on every deliverable.
We integrate into your project workflow, communicate in your software ecosystem, and deliver to your standards. No learning curve for your team. No project disruption.
You engage us per project, scoped specifically to your coordination needs. No long-term commitment. No bloated overhead. Pay for the work that generates value.
Real coordination challenges. Real deliverables. Real outcomes. Each engagement below reflects the standard of work SynchroEdge delivers on every project.
Full MEP coordination for a 6-story ground-up residential building. Federated model integrating architectural, structural, HVAC, plumbing, and electrical. 247 clashes identified and resolved pre-construction. GC reported zero MEP-related RFIs during rough-in phase.
BIM coordination and construction documentation for a major religious building renovation. Complex adaptive reuse — existing structure, new MEP systems, landmark constraints. Full Revit model coordinated with MEP engineers and structural consultants. Permit-ready documentation set delivered for DOB filing.
MEP coordination and CFS modeling for an office-to-residential conversion project. Structural uncertainty managed through LOD 350 CFS framing model. Full MEP system redesign coordinated in Revit. New plumbing stacks, electrical distribution, and HVAC routed around existing structural elements — all clash-detected before contractor mobilization.
"I have spent 8 years solving coordination failures for other firms.
Now I solve them for yours."
I founded SynchroEdge after nearly a decade working inside complex BIM environments — multifamily residential, institutional buildings, religious renovations, civil infrastructure. 60+ completed Revit projects. Thousands of clashes detected and resolved. Hundreds of construction document sets delivered.
I kept watching the same failure happen at different firms: exceptional designers producing projects that fell apart in coordination. Not because of bad design — because nobody was managing the gap between what was designed and what was documented and coordinated.
SynchroEdge exists to close that gap. We are not a BIM outsourcing shop. We are a senior BIM coordination team embedded in your project workflow — from design development through construction documentation — making sure what leaves your office is buildable, coordinated, and clash-free.
Upload your drawings or describe your project below. Within 48 hours, we will send you a preliminary coordination risk assessment — identifying where your MEP, structural, and architectural systems are most likely to conflict. No charge. No obligation.
We work with architecture firms, general contractors, MEP engineers, and developers across the World. Reach out through any channel below — we respond within 24 hours.
Tell us about your project. We will tell you exactly where the coordination risks are and how we can eliminate them before they cost you money in the field. No pitch. Just straight talk from a senior BIM specialist.